Hole Size: 1/4"
Bit Style: A
Cut Length: 2 Inches
Recommended for all paper and cardboard stocks. This Standard Heavy-Duty drill is vacuum hardened to 56 Rockwell. It should be sharpened more frequently than coated drills. Because it is hardened, it holds up well under repeated sharpening.
Style A will fit the following machines.
Superspeed
Casco
Challenge
Climax
Ottawa
Mark III & IV
Lassco-Spinnit
Rosback
NOTE: If you have a Challenge Model EH3A, EH3C, MS5 or MS10 this drill will not work. A 2-1/2 inch cut length is required. (Mfg P/N PD14-2)
